Turn any wall, ceiling or floor into a infrared heating panel. 4 Liter

Turn any wall, ceiling or floor into a infrared heating panel. 4 Liter

498.00

Category:

Description

ThermOhm “4 Liter” Infrared Heating Paint

Turn any wall or ceiling into a very energy efficient radiant infrared heater. Using low energy consumption. Using safe extra low voltages (24V) and suitable for every type of room.
Large seized Infrared heaters on low temperature on walls and ceilings are the future’
More than 50% of the required heat load can be saved with an efficient layout and intelligent control of the infrared heating system.
Infrared heaters can reduce the required heat needed to maintain a comfortable temperature in a building (heat load), by at least 15 percent.
From 100 tot 250 watts / m2 consumed typical is 45°c warm. Powered by 24V transformers low consumption rate can be integrated with Solar PV systems to further assist with energy savings.
“It warms extremely efficiently and can be distributed in any form on the wall surface. The painted walls are about 45°c warm.
Typical consumption productivity: 8 m²/Liter. To heat a 25 square meter living room, six square meters 6 m² of heating paint.

Infrared panels ThermOhm Before and After Overpainting Invisible
Infrared panels ThermOhm Before and After Over-painting, it becomes Invisible. Thermohm Heat Generating Paint with CNTs (Carbon nano tubes). Large seized Infrared heaters on low temperature on walls and ceilings are the future’

The coating acts as a super capacitor to store energy to discharge it in plasmonic waves at short wavelength also know as far infrared.
The coating has a low heat storage capacity, as a result of which the generated heat is directly released into the environment.
When electricity flows through the paint film, it comes across a natural resistance between the individual nano-particles. These “collisions” generate heat.
The heat is generated by direct use of non-hazardous low-voltage sources (24 VDC or solar power)

There is no wear and tear, it last forever. It remains functional as long as you want. You can drill a hole in it, hammer nails into it, overpower it, the paint and heating remains functional.

Thermohm Heat generating paint has a wide field of possible uses.

  • Heating your garage, boat, truck, car, everywhere where heating is required..
  • De-icing – removal of snow, ice or frost from a surface, also prevent parts from icing.
  • Heating of surface of any shape.
  • Very easy to apply, like any other paint.
  • Direct use of low-voltage sources (24VDC, solar power).
  • Very simple electrical connection.
  • Simple regulation and control.
  • High electrical safety as it works on VDC low voltage.
  • Perfectly uniform heating of large surface areas without hot spots.
  • Very cost-efficient heat in all aspects.
  • High heating power.
  • Heat up and cool down almost immediately.
  • 1 Liter ThermOhm covers approx: >8m²/Liter

Heat Dissipation: >60°C ( >140°F ) DC 24 Volt
Far infrared radiation feels like comfortable heat like sunlike radiant heat.
The heat generating paint must be completely cured (dry) before using it as heat generating paint.

Nanotubes Thermal Far Infrared Radiation Coatings
Very simple 24VDC electrical connection. High electrical safety as it works on low voltage.
You can apply on top of the thermohm paint the color you want to conceal that there is thermohm paint beneath it.

Thermohm Heat Generating Paint shipping Information:

Free shipping worldwide!
Thermohm Heat Generating Paint is an aqueous non-hazardous substance and non-dangerous. Aqueous means water-based or waterborne paint.